- Selleys Kwik Grip Horizontal is a heat resistant, solvent-based, flexible contact adhesive that forms an instant bond on contact of two surfaces.
Features:
- Use on Horizontal surfaces.
- Easy to spread by brush.
- Immediate set on contact.
- Suitable for interior and exterior jobs.
- Heat resistance up to 130°C.
- Water resistant.
- Maximum strength after 24 hours.
- Thicker consistency prevents running or stringing.
- Cured adhesive is resistant to dilute acids and alkalis.
Can be Used For:
- Bonding veneers of timber and laminated plastics, eg. Laminex and Formica to bench or table tops
- Areas where clamping or pressing facilities are either not available or difficult to use
- Patching vinyl flooring
- Replacing a vinyl tile
- Cork tiling
- Laying a vinyl floor
- Fixing shoes
- Fixing laminate to tables, benchtops etc
- Leather shoe and leather repairs, leather work eg handbags
- Repairing tents and outdoor equipment
- Adhering flexible or other material to Aluminium
- Joining, repairing holes in tents, car covers and other outdoor equipment
- Attaching rubbers to your fridge door
- Repairing your wetsuit
- Some plastics such as vinyl sheeting and polystyrene are attacked by Kwik Grip Solvent. Test in an inconspicuous area prior to application.
- Seek advice of vinyl flooring manufacturers prior to use with their products as discolouration and bubbling can occur with some types.
Suitable For Materials:
- Cork
- Rubber
- Felt
- Canvas
- Leather
- Metals
- Timber
- Laminated plastics (laminex, formica)
- Hardboard
- Compressed board
How to Use:
- Ensure surfaces are clean and dry. If cutting laminate sheets, cut slightly oversize. Tube: Use reverse end of cap to carefully pierce foil seal. Discard cap and replace with nozzle/cap provided.
- Apply to both surfaces and spread evenly ensuring surfaces are completely covered. Keep surfaces apart until adhesive is almost dry – approximately 20 minutes, no more than 40 minutes.
- Position items carefully, still keeping surfaces apart with dowels. When edges are perfectly aligned, remove dowels, and working from one edge, press surfaces firmly together. Grabs immediately on contact.
- Secure bond by running a roller over the bonded surfaces or by hammering the surface from the centre outwards using a padded block. Maximum bond strength is reached after 24 hours. Clamping of warped or curled surfaces may be necessary.
Clean Up:
- Uncured product may be removed with xylene.
- Cured product can be sanded and scraped.